WAGNER TITANUS - Regulations for Fire Detection Systems

Pipe Design TITANUS MICRO·SENS
®
4 – 2 Data: 01/09 MS_A_04-en-e
4.1.1 Regulations
The current respective national regulations in each particular country
must also be complied with and project planning must be adjusted to
such regulations.
EN 54-20
The air sampling smoke detection systems shall be planned in accor-
dance with the project planning guidelines described in Chapter 4.2.1 in
order to be compliant with EN 54-20.
The following guidelines must also be complied with for systems in ac-
cordance with the requirements of VdS Schadenverhütung:
• "Guideline for automatic fire alarm systems, planning and installa-
tion", VdS Schadenverhütung GmbH, Cologne, Germany (VdS 2095)
• "Local application protection for electric and electronic equipment -
rules for planning and installation" guideline, VdS Schadenverhütung
GmbH, Cologne, Germany (VdS 2304)
• The technical bulletin “Project Planning for air sampling fire alarms”
VdS Schadenverhütung GmbH, Cologne, Germany (VdS 3435)
The following national regulations must also be complied with in Ger-
many, for instance:
• DIN VDE 0833 part 1 and 2 "Alarm systems for fire, intrusion und
hold-up"
• Additional regulations for installing fire alarm systems which are laid
down by fire authorities and building supervisory boards or building
regulation authorities and are only valid locally.