WAGNER TITANUS User Manual

TITANUS MICRO·SENS
®
Product Description
MS_A_01-en-e Data: 01/09 1 – 3
1.2 Areas of Application
The TITANUS MICRO·SENS
®
air sampling smoke detection system is a
fire alarm system for the protection of rooms, equipment and air condi-
tioning ducts.
Principle Air samples for a monitoring area are taken through the draw-off holes in
a pipe system and fed to the detection unit.
The principle is particularly suitable for areas in which point type alarms
are not used or can only be used to a limited extent.
This involves areas in particular …
• where is a high risk of fire,
• where high detection sensitivity is required,
• where false alarms must be avoided,
• which are difficult to access and in which it is difficult to mount and/or
inspect point type alarms,
• where interrupting operations for inspection and servicing must be
avoided,
• which are air conditioned,
• where the height is greater than is allowed for point type alarms,
• where for aesthetic reasons point type alarms are not wanted,
• where there are strong electromagnetic fields,
• which are subjected to high or low temperatures,
• which have a heavy dust load,
• where the fire alarm equipment must be protected against vandalism
or sabotage

WAGNER TITANUS Specifications

General

Power Supply	24 V DC
Operating Temperature	-20°C to +60°C
Alarm Output	Relay contacts
Certification	VdS, EN 54
Humidity Range	10% to 95% (non-condensing)