WAGNER TITANUS User Manual

TITANUS MICRO·SENS
®
Commissioning
MS_A_07-en-e Data: 01/09 7 – 19
7.9 Commissioning the reaction indicators
An indicator is selected in the “ROOM·IDENT” screen for testing the ad-
dress setting for the reaction indicators during commissioning. You can
then test whether the right reaction indicator is lit up and as set is either
flashing or on permanently.
Before quitting the “ROOM·IDENT“ screen, the reaction indicator selec-
tion must be set to “Off“ and “Current Setting“ must also be at “Off“.
?
TITANUS
MICRO · SENS
®
Cancel
10
9
8
7
6
5
4
3
2
1
0
min s
10
Start
00000
s
s
s
s
s
E
D
C
B
A
Smoke level
File Record Settings Device-Selection
(Date Time)
Fault messages
Status Settings ROOM-IDENT
Reception
Serial No.
Pre selection time
Te s t m o d e a c t i v e
Seat of fire not established Seat of fire established
Establish seat of fire
Measuring active
Test external indicators
Off
Indicator selection
Off
Current setting

WAGNER TITANUS Specifications

General

Power Supply	24 V DC
Operating Temperature	-20°C to +60°C
Alarm Output	Relay contacts
Certification	VdS, EN 54
Humidity Range	10% to 95% (non-condensing)