WAGNER TITANUS User Manual

Contents TITANUS MICRO·SENS
®
Data: 01/09 MS_A_Inhalt-en-e
Contents
5.7
Incorporating the relay board RU-1/RU-2 15
5.7.1 Function switching plan, relay board RU-1 16
5.7.2 Function switching plan, relay board RU-2 17
5.8 Using TITANUS MICRO·SENS
®
in the AlgoRex
®
fire alarm system 18
5.8.1 Collective Connection 18
5.8.2 Function switching plan, collective connection 19
5.8.3 Use of the TITANUS MICRO·SENS
®
with AlgoRex
®
line components 20
5.8.3.1 Installation of AlgoRex
®
line components
into the TITANUS MICRO·SENS
®
additional housing 20
5.8.3.2 TITANUS MICRO·SENS
®
and AnalogPLUS technology 21
5.8.3.3 TITANUS MICRO·SENS
®
and interactive technology 22
5.9 TITANUS MICRO·SENS
®
in a network 23
5.9.1 Fitting the network module into the
TITANUS MICRO·SENS
®
additional housing 23
5.9.2 Connecting the Network Module 24
5.10 Parallel displays 25
5.10.1 Connecting the parallel displays to TITANUS MICRO·SENS
®
25
5.10.2 Parallel display housing 26
5.10.3 Electrical connection 27
5.11 Reaction indicator 28
5.11.1 Addressing the reaction indicators 28
5.11.2 Connecting the reaction indicator to the
TITANUS MICRO·SENS
®
29
5.12 Inserting the detection unit in the device base unit 30
5.13 Settings 31
5.13.1 Detection Unit 31
5.13.1.1 Setting reaction sensitivity 32
5.13.1.2 Delay time for triggering the alarm 32
5.13.1.3 Threshold for air flow monitoring 32
5.13.1.4 Delay time for air flow fault 33
5.13.1.5 Action-Alarm Threshold 33
5.13.1.6 Fault display 33
5.13.1.7 Dynamic air flow 34
5.13.1.8 ROOM·IDENT 34
5.13.1.9 LOGIC·SENS 34
5.13.1.10 Fire Alarm threshold after ROOM·IDENT 35
5.13.1.11 Setting the ventilator voltage 35
5.13.1.12 Inputting the current air pressure 36
5.13.1.13 Inputting height above Normal Sea Level (NN) 36
5.13 Data Logging 37

WAGNER TITANUS Specifications

General

Power Supply	24 V DC
Operating Temperature	-20°C to +60°C
Alarm Output	Relay contacts
Certification	VdS, EN 54
Humidity Range	10% to 95% (non-condensing)