WAGNER TITANUS User Manual

TITANUS MICRO·SENS
®
Contents
MS_A_Inhalt-en-e Data: 01/09
Contents
6 Installation Pipe System 6 – 1
6.1 Linear expansion of the pipe system 3
6.2 Patented air sampling points 5
6.3 Ceiling lead through 7
6.4 Monitoring in forced air flow systems (ventilation or climatic applications)9
6.4.1 Detection at air inlets/outlets 9
6.4.2 Detection in bypass systems 9
6.5 Filter 10
6.5.1 Installation of air filter, type LF-AD-x 10
6.5.2 Mounting of the special filter type SF-400/650 11
6.6 Air return 12
6.7 Noise suppressor 13
6.8 3-Way ball valve 14
6.9 Steam trap 15
6.10 Test adapter 16
7 Commissioning 7 – 1
7.1 Commissioning the detection unit 1
7.1.1 Plug and Play Commissioning 2
7.1.2 Commissioning with the diagnostics tool 2
7.2 Installing diagnostics software 3
7.3 Air flow sensor adjustment 5
7.3.1 Air Pressure-Independent Adjustment 5
7.3.2 Air Pressure-Dependent Adjustment 6
7.4 Testing the detection unit and alarm forwarding 8
7.5 Testing air flow monitoring 9
7.6 Testing fault forwarding 10
7.7 Testing the air flow sensory analysis function 11
7.7.1 Preparations for function testing 11
7.7.2 Carrying out function testing 13
7.8 Commissioning fire seat location 15
7.9 Commissioning the reaction indicators 19

WAGNER TITANUS Specifications

General

Power Supply	24 V DC
Operating Temperature	-20°C to +60°C
Alarm Output	Relay contacts
Certification	VdS, EN 54
Humidity Range	10% to 95% (non-condensing)