WAGNER TITANUS User Manual

Contents TITANUS MICRO·SENS
®
Data: 01/09 MS_A_Inhalt-en-e
Contents
8 Maintenance 8 – 1
8.1 Visual check 1
8.2 Testing detector and alarm forwarding 1
8.3 Testing pipe system 1
8.4 Exchanging the detection unit 2
8.5 Exchanging the type AF-TM air filter for the device base 3
8.6 Changing the filter on the LF-AD-x air filter 4
8.7 Changing the filter on the SF-400/650 special filter 5
8.8 Pipe system blow through process 6
8.9 Checking the air flow sensor adjustment 7
8.10 Testing fire seat location and the reaction indicators 9
8.11 Testing Air Flow Monitoring 10
8.12 Testing Fault Forwarding 10
8.13 Maintenance Intervals 10
Appendix
Air Pressure Adjustment Tables
Projection Tables
System Product List
Certificate of Approval of Components and Systems
EMC Declaration of Conformity
Inspection Protocol
Glossary
Conformity certification pursuant to EU

WAGNER TITANUS Specifications

General

Power Supply	24 V DC
Operating Temperature	-20°C to +60°C
Alarm Output	Relay contacts
Certification	VdS, EN 54
Humidity Range	10% to 95% (non-condensing)