Waters GCT Premier - Ramping the Probe During a Acquisition

Controlling the DI probe temperature 7-17
Ramping the probe during a acquisition
A probe ramp can be saved as a .prf file and run from a Tune window
acquisition or via the Sample list. This is done by referencing the .prf file from
the acquisition tab.
See also: Use Probe Ramping Method on page 4-4 and Use Probe Ramping
Method on page 4-14.
Probe Control dialog box Control tab toolbar buttons:
Button Description
Starts the active probe ramping method.
Stops the active probe ramping method.
Pauses the active probe ramping method.