Chapter 1 General 40058725 BTA Alpha HSM
Version: 12.19.17 Page 7 of 112 GB
1. General
Overview
Congratulations, you have chosen to acquire a high-quality labeler. Our aim is to ensure
that you can fully utilize this labeler to your complete satisfaction for many years to come.
To ensure this, we absolutely recommend that the installation (refer to the notice on
page34) be carried out by one of our experienced specialists. Contact our service hotline
(see page 9). We are available to you 24-hours a day from Monday - Friday.
Limitation of liability
All information and instructions in this manual have been compiled taking into account the
applicable standards and rules, the latest technological developments as well as our many
years of know-how and experience.
The manufacturer will not accept any for damages due to:
Non-observance of the operating instructions,
Improper use,
Use of untrained personnel,
Non-approved modifications to the labeler,
Use of spare parts that have not been approved by the manufacturer.
The obligations agreed in the delivery contract, the general terms and conditions of
business as well as the manufacturer's delivery conditions and the statutory regulations
applicable at the time of contract conclusion will apply. We reserve the right to technical
changes and further development in order to improve the performance characteristics.
Warranty conditions
The warranty conditions comply with the general terms and conditions of business of
Bluhm Systeme GmbH valid at the time of purchase.
Copyright
This documentation or parts of the document may only be copied, photocopied,
reproduced or translated into other languages for personal use. Reproduction for
disclosure to third parties is not permitted without prior written consent from Weber
Marking Systems GmbH.
To Next Page
Loading...
Need help?
General