Chapter 2 Safety regulations 40058725 BTA Alpha HSM
Version: 12.19.17 Page 14 of 112 GB
2. Safety regulations
Behaviour in case of emergencies
The operating personnel must be familiar with handling and the locations of safety, acci-
dent reporting, first-aid and rescue equipment.
What to do in case of an emergency?
If people, body parts or objects are jammed in the moving parts of the labeler, im-
mediately disconnect the labeler from the compressed air and power supply.
Initiate all necessary assistance for injured persons immediately. It is essential to
observe all applicable safety regulations to avert further personal injury.
Call for medical help for the injured persons.
Eliminate all accident causes.
Fundamental safety regulations
Safety instructions provide information in the form of texts and symbols to warn against
and avert danger, in order to avoid personal injury and damage to property.
Safety instructions are preceded by signal words to express the extent of the risk.
Safety instructions can be attached directly to the labeler or be found in the associated
documentation.
Meaning of the risk levels
This symbol indicates hazardous situations, which will lead to se-
rious injuries or death. All safety instructions must be observed to
avoid personal injury.
This symbol indicates hazardous situations, which can lead to
severe injuries or death. All safety instructions must be observed
to avoid personal injury.
This symbol indicates hazardous situations, which can lead to
medium or light injuries. All safety instructions must be observed
to avoid personal injury.
This symbol indicates hazardous situations, which can lead to
property damage. All safety instructions must be observed to
avoid property damage.
To Next Page
Loading...
Need help?
General