Chapter 1 General 40058725 BTA Alpha HSM
Version: 12.19.17 Page 8 of 112 GB
Purpose and overview of the operating instructions
These operating instructions are designed to introduce the labeler and to facilitate its in-
tended use.
It contains important information for the user to ensure that the labeler is operated safely
and correctly. Their observance helps,
to avoid hazards,
to reduce repair costs and downtime and
to increase the reliability and lifetime of the labeler.
The operating instructions are valid for the labeler specified in the title with the associated
type number.
The operating instructions must be accessible at all times at the place of use of the
labeler. It must be read and applied by the people who are commissioned to work on the
label dispenser.
Printing errors, mistakes and changes in accordance with the latest technological
developments are reserved. For clarification, illustrations can be shown without protective
devices.
Notes regarding the operating instructions use
A detailed explanation of the writing and representation styles used in these operating
instructions is provided below.
Buttons, switches and operating fields that need to be actuated are enclosed in
square brackets.
Example: Press the [Start] button.
Menu items and references to chapters and key words are enclosed in "..."
Example: acc. to chapter "Technical data" on page24.
Operations that must be processed in a fixed sequence are numbered.
Disconnect the mains plug ...
Special information is written in bold and/or with a grey background.
This is an example of special information!
All illustrations (Fig.) are numbered consecutively for each chapter. This means
that a reference to "Fig. 2-1" is equivalent to the 1. Illustration in Chapter 2.
Illustrations are often reduced in complexity to show the essentials. They may
therefore differ from the original. The only reason that covers or protective devices
are not shown in illustrations is to promote better understanding.
Some illustrations are limited to the representation of a certain version (e.g. only
RH, only LH...). This particularly applies when the information content can in es-
sence be applied to other versions.
To Next Page
Loading...
Need help?
General