Chapter 8 Operation 40058725 BTA Alpha HSM
Version: 12.19.17 Page 90 of 112 GB
IP address link
When the *Zero-Down-Time function is used, the
"Master" labeler is allocated the IP address of the
"Slave" labeler.
The input options for the IP mask are presented
when the IP address is entered.
Zero-Down-Time mode is activated by the ma-
chine parameter.
Fig. 8-58: IP-address link
*The Zero-Down-Time function is intended to ensure product labeling also when one labeler fails. This re-
quires, in addition to more hardware, a redundant labeling system (slave) that "takes over" as soon as the
"master" labeler fails.
PLC IP address
Via the Ethernet interface it is possible to com-
municate with the labeler from a PLC.
The PLC IP address is entered here.
Fig. 8-59: PLC IP address
Time/date
Here you can set the date and time. The settings
are, for example, used for recording the event da-
ta.
Language
Here you can set the preferred menu language of
the labeling system. The following operator lan-
guages are available:
German, English, French, Dutch, Spanish, Swe-
dish, Polish, Czech, Portuguese
IP-Addr X
IP-Addr X