System Software: Introduction
Issue 2
99
Part No. 306-0430-102
S
YSTEM
S
OFTWARE
Introduction
This section describes the menus available in the printer control software. The function of each menu option is
briefly described below.
Using the Menus
Using the Arrow Keys
To select a menu:
1
Press
or until the menu is highlighted.
2
Press
enter
.
To select an item from a menu:
3
Press
or until the option is highlighted.
4
Press
enter
.
Note: If there are too many items on the menu to display on screen, the label More appears adjacent
to the top and/or bottom of the menu to indicate more menu entries above or below those
currently displayed. Scroll through the items by repeatedly pressing
or .
Using the Keypad
To select a menu or item press the combination of the
alt
key and the letter highlighted in the menu or item
name. For example, press
alt
+M
to select the Messages menu.
alt
+E
is useful to access the Editor
menu while editing a message,
Entering Text, Numbers and Toggle Values
To enter text into a field, simply type the required text or special character using the keypad.
Numerical values can be entered using keys 0 to 9, or by pressing
to increase the value or to decrease
the value.
ctrl
plus or increases or decreases the value by –10 and +10 respectively.
Toggle values (e.g. on/off) can be changed by pressing
or . These keys are also used in some menu
options to set and unset attributes.
Esc Key
If at any time you want to exit a menu without changing any settings, press
esc
.
To Next Page
Loading...
