WILLETT 430 - Options and Accessories

430 Ink Jet Printer Service and Maintenance Manual
168
Issue 2
Part No. 306-0430-102
Options and Accessories
Not illustrated.
Part number Description
200-0042-005 Photocell assembly 3.5m
200-0042-006 Photocell assembly 6.5m
500-0071-112 24 V 5W spare bulbs
527-0001-126 2500 PPR shaft encoder
527-0001-127 5000 PPR shaft encoder
527-0001-128 200 mm measuring wheel
527-0001-129 Diaphragm coupling
527-0001-130 Flange adaptor plate
527-0001-131 Angle bracket
527-0001-132 3 M cable
527-0001-133 5 M cable
200-0390-112 Expansion board
500-0098-337 Modem
100-0370-141 RS485/sensor cable assembly
100-0370-175 RJ11 Connector assembly
100-0370-150 Photocell jumper assembly
100-0370-151 Shaft encoder jumper assembly
100-0370-157 LAN jumper assembly
100-0370-158 RS232 jumper assembly
100-0370-156 Modem cable assembly
100-0370-148 RID/20mA cable assembly
100-0370-149 MSG Select/Opto cable assembly
100-0370-152 Volt-free relay cable assembly
500-0076-134 DIN connector blanking cap
500-0036-578 3 Way DIN plug
500-0036-581 4 Way DIN plug
500-0036-582 5 Way DIN plug
500-0036-577 6 Way DIN plug
500-0036-583 7 Way DIN plug
500-0036-584 8 Way DIN plug
204-0335-101 Printhead positive air kit
Table 48 Options and Accessories