WILLETT 430 - Printer Preparation for Use

430 Ink Jet Printer Service and Maintenance Manual
4
Issue 2
Part No. 306-0430-102
Preparation for Use
(
1
) Filler Plug
(
2
) Ink Mixer Bowl
3
2
1
(
3
) Filler Tubes
Figure 3 Ink Mixer Bowl Filler Plug Location
1
Remove and retain the black rubber shipping cap from the breather tube.
2
Fit the breather tube to the blue fitting located on the underside of the top cover.
3
Ensure that the correct fuses (Figure 4 (
2
)) are fitted for the local mains electrical supply as shown in the
table below.