430 Ink Jet Printer Service and Maintenance Manual
104
Issue 2
Part No. 306-0430-102
Debug Monitor Monitors the electronic system to detect possible hardware
or software faults.
This facility should only be used by experienced Willett-
trained engineers.
Set Jet Start
Sequence
Allows setting of the timing and sequence of the valves in the
ink system for the jet start process. Opens the
Jet Startup
sequence
dialogue with a warning.
This facility should only be used by experienced Willett-
trained engineers.
Set Jet Stop
Sequence
Allows setting of the timing and sequence of the valves in the
ink system for the jet stop process. Opens the
Jet Shutdown
sequence
dialogue with a warning.
This facility should only be used by experienced Willett-
trained engineers.
Set Jet Flush
Sequence
Allows setting of the timing and sequence of the valves in the
ink system for the jet flush process. Opens the
Jet flush
sequence
dialogue with a warning.
This facility should only be used by experienced Willett-
trained engineers.
Set Jet Clean Start
Sequence
Allows setting of the timing and sequence of the valves in the
ink system for the jet clean start process. Opens the
Jet
clean start sequence
dialogue with a warning.
This facility should only be used by experienced Willett-
trained engineers.
Set System Flush
Purge Sequence
Allows setting of the timing and sequence of the valves in the
ink system for the flush purge process. Opens the System
flush purge sequence with a dialog and warning.
This facility should only be used by experienced Willett-
trained engineers.
Set Jet Clean Stop
Sequence
Allows setting of the timing and sequence of the valves in the
ink system for the jet purge process. Opens the
Jet clean
stop sequence
dialogue with a warning.
This facility should only be used by experienced Willett-
trained engineers.
To Next Page
Loading...
