Xiotech—Proprietary 160337-000 Rev D, 30 September, 2013 Page 65
Initialize and Configure ISE User Guide
The ISE creates the mapping and displays a confirmation similar to that shown in the figure (46) below.
Figure 46. Volume Host Mapping
After the initial volume-host mapping scheme has been created, it can be modified or deleted at any time using
the CLI commands detailed in “Modify Volume–Host Mappings” on page 82.
Presenting 'Volume03' to 'Prod01': OK
Presenting 'Volume03' to 'Prod02': OK
To Next Page
Loading...
General