Xinje XD Series User Manual

239
(5) If "Successfully connected to the local PLC" is displayed, the connection is successful.
Note:
(1) If it shows the error “find device timeout”, you can click "Restart Service" to try to
reconnect, or restart the programming software and PLC to reconnect. If you still can't
connect, you need to check whether the PLC is power on, whether the USB download
cable is connected properly, whether the USB driver and XINJEConfig software are
installed properly.
tudonghoatoancau.com

Xinje XD Series Specifications

General

Input Voltage	24V DC
Storage Temperature	-20°C to 70°C
Protection Class	IP20
Type	PLC
Series	XD
Programming Language	Ladder Logic, Instruction List
Communication Interface	RS232, RS485
Power Supply	24V DC
Digital Inputs	Available (number varies by model)
Digital Outputs	Available (number varies by model)
Analog Inputs	Available (number varies by model)
Analog Outputs	Available (number varies by model)
Output Type	Relay, Transistor
Number of Inputs	Varies by model (see Digital Inputs and Analog Inputs)
Number of Outputs	Varies by model (see Digital Outputs and Analog Outputs)
Operating Temperature	0°C to 50°C
Humidity	5% to 95% (non-condensing)