Yamaha F150B - Installing the Anode (Cylinder Block)

7-51
Power unit
POWR
3. Install the oil filter, and then tighten it to
the specified torque using a 72.5 mm
(2.9 in) oil filter wrench c. Apply a thin
coat of engine oil to the O-ring of a new
oil filter before installation.
4. Install the exhaust cover. See “Installing
the exhaust cover” (7-34).
Installing the anode (cylinder block)
1. Install the anodes a, b, c, and d.
Oil filter wrench c:
90890-06830
Oil filter:
18 N·m (1.8 kgf·m, 13.3 ft·lb)
a
c
b
d
a
c