YASKAWA E-S Series User Manual

vii
 Notation Used in this Manual
 Notation for Reverse Signals
The names of reverse signals (i.e., ones that are valid when low) are written with a forward slash (/)
before the signal abbreviation.
Notation Example
BUSY
is written as /BUSY.
 Notation for Parameters
The notation depends on whether the parameter requires a numeric setting (parameter for numeric
setting) or requires the selection of a function (parameter for selecting functions).
•
Parameters for Numeric Settings
Notation Example
Pn100
Speed Loop Gain
Setting Range
10 to 20,000 0.1 Hz 400 Immediately
Setting Unit Default Setting When Enabled
Classication
Tuning
Parameter Meaning When Enabled Classication
Pn140
n.
0
(default setting)
Do not perform vibration suppression.
Immediately Tuning
n.1
Perform vibration suppression for a specic frequency.
n.2
Reserved setting (Do not use.)
This is the setting range
for the parameter.
Parameter
number
This is the
parameter setting
before shipment.
This is when any
change made to the
parameter will
become effective.
This is the parameter
classication.
This is the minimum
unit (setting increment)
that you can set for
the parameter.
This column explains the
selections for the function.
The notation “n.
” indicates a parameter for
selecting functions.
Each
 indicates the setting for one digit.
The notation shown here means that the third digit
from the right is set to 2.
Parameter
number
•
Parameters for Selecting Functions
Notation Examples for Pn008
Pn008 =
n.
X
Indicates the rst digit from
the right in Pn008.
Pn008 =
n.
1
Indicates that the rst digit from
the right in Pn008 is set to 1.
Pn008 =
n.
X
Indicates the second digit
from the right in Pn008.
Pn008 =
n.
1
Indicates that the second digit from
the right in Pn008 is set to 1.
Pn008 =
n.
X
Indicates the third digit from
the right in Pn008.
Pn008 =
n.
1
Indicates that the third digit from
the right in Pn008 is set to 1.
Pn008 =
n.X

Indicates the fourth digit from
the right in Pn008.
Pn008 =
n.1

Indicates that the fourth digit from
the right in Pn008 is set to 1.
n.0 0 0 0
Notation
Digit Notation Numeric Value Notation
Meaning Notation Meaning

YASKAWA E-S Series Specifications

General

Brand	YASKAWA
Model	E-S Series
Category	Servo Drives
Language	English