17-5
IM 701240-01E
17
Troubleshooting, Maintenance, and Inspection
Errors in Setting (800 to 899)
Code Message and Corrective Action Section
800 Illegal date-time. Set the correct date and time. 3.6
801 Illegal file name. The file name contains characters which are not allowed or the file name is not Chapter 13
a valid MS-DOS file name. Enter another file name.
803 Turn off accumulate mode to enter history menu. It is not possible to activate the history menu 8.4
by pressing the HISTORY key during accumulation.
804 Cannot change this parameter while running. Press the START/STOP key to stop acquisition. 7.1
808 Can not be specified at the current record time setting. 5.2,
Appendix 1
809 Cannot change edge for status other than X. Chapter 6
Set the state of the channel corresponding to condition A to ‘X’.
811 Cannot change display points in roll mode. 5.2
813 Set Items in measure menu. Set appropriate measurement items. 11.5
814 Duplicated Name. Change the label string. 8.10
816 Cannot turn off with the current record length. Please Change record length. 5.2
817 Cannot change. Please change X Trace in the X-Y menu. 8.6
819 Cannot change when Channel Display is OFF or Math settings are invalid. 5.1,
Set the channel display ON or make appropriate Math settings. Chapter 10
821 Cannot change when External Clock is active. 5.20
823 Cannot change while running. Set the acquisition mode to Normal. 7.1, 7.2
824 Cannot change with the current acq mode. 7.2
829 Cannot change when Logic Mode is OFF or all bits of Logic Display are OFF. 5.18
834 Duplicate SCSI ID. Set different ID numbers. 13.7
835 Cannot change settings while realtime printing or realtime recording. 7.5
Stop printing or recording.
836 Cannot change settings during Action On Trigger. Stop the Action On Trigger. 6.18
837 Cannot set the channels which do not have modules installed. –
838 Cannot set the channels which do not have the strain module installed. –
839 Cannot Set or Execute. –
840 If the trigger mode is set to Single, Single (N), or LOG, the acquisition mode cannot be set to 6.1, 7.2
Average.
843 If the acquisition mode is Average, the trigger mode cannot be set to Single, Single (N), or Log. 6.1, 7.2
844 It can’t be set at the time of the roll mode. 5.2
845 The trigger mode cannot be set to Single(N) during the roll mode. 5.2, 6.1
850 The acquisition mode cannot be set in the current record length. 5.2,
Appendix 1
851 Computation cannot be carried out at the current record length. 5.2, 10.3
855 Cannot be configured or executed during the history search operation. 11.2, 11.3
856 The record cannot be selected. 11.1 to 11.3
857 History record does not exist. 11.1 to 11.3
858 Cannot be configured or executed while computation is in progress. 11.1 to 11.3
Aborted when history display mode is set to One.
859 It can’t be set up or be carried out in the Preview mode. 12.1
Choose Quit, and cancel the Preview mode.
860 Cannot be configured or executed while updating the history all display. 11.1 to 11.3
Aborted when history display mode is set to One.
861 This format cannot output with color. 12.2, 12.3
868 Processing statistics. 11.6
To perform other operations, abort the statistical processing.
869 The channel which couldn’t be set up was specified. Chapter 11,
13.8
870 Cannot be set when the acquisition mode is set to average. 7.2
872 Cannot be set during realtime recording. 7.5
17.2 Messages and Corrective Actions
To Next Page
Loading...
