Zebra MC33 Series Integrator Guide

Maintenance and Troubleshooting
223
Figure 156 Ping Screen
Ping Settings
Ping Settings provides options for configuring ping input settings. To configure ping input settings, touch .
• Continuous ping - Enable or disable continuous ping (default - disabled).
• Count - specifies the number of ping requests to send (default - 10). This option is not available when
using continuous ping.
• Interval (ms) - specifies the amount of time in ms between ping requests (default - 1000).
• Packet Size - specifies the size of each ping packet in bytes (default - 64).

Zebra MC33 Series Specifications

General

Connectivity	USB 2.0, Bluetooth
Touch Panel	Capacitive, glove and wet touch support
Keypad Options	Touchscreen or physical keypad
Scanning	1D/2D barcode scanning
Wireless LAN	IEEE 802.11 a/b/g/n/ac
Operating Temperature	-20° C to 50° C