Zebra MC33 Series Integrator Guide

Maintenance and Troubleshooting
224
Fusion Advanced Configuration
Use the Fusion Advanced Configuration screen to select a power save mode or set a band preference.
A password is required to access settings in Fusion Advanced Configuration. In SmartMU full version, use the
SmartMU security application and an Mobile Device Manager (MDM) intent. In SmartMU lite, use the default
password
?gUpD!8(.
Figure 157 Fusion Advanced Config Screen
After entering the password, the following options are available:
• Power Save Mode
• Active (CAM)
• WMM-PS
• Null Data PS (NDP) (default)
• PS Poll
• Band Preference
• Disable (default)
• Prefer 2.4 GHz
• Prefer 5 GHz

Zebra MC33 Series Specifications

General

Connectivity	USB 2.0, Bluetooth
Touch Panel	Capacitive, glove and wet touch support
Keypad Options	Touchscreen or physical keypad
Scanning	1D/2D barcode scanning
Wireless LAN	IEEE 802.11 a/b/g/n/ac
Operating Temperature	-20° C to 50° C