ABB AC 800F

5 AC 800F Functional Description
5-39
------------------------------------------------------------------------------
CPU is i960HT [B0/B1] with 4 MByte RAM
System will startup in AUTO mode
First Network interface [00:C0:C9:10:00:88] - Cheapernet
- IP address: 172.16.1.1
- Subnet mask: 255.255.240.0
Second Network interface [00:C0:C9:10:1E:EB] - Cheapernet as RedLink
Default router: 0.0.0.0
RTC is not initialized
------------------------------------------------------------------------------
<C>hange, set <T>ime, <S>ave or continue <B>ooting?
Fig. 5-21 Current parameters of the configuration block
<S>ave saves all displayed configuration data in a non-volatile and the message
Parameters saved
is output.
Setting date and time
Upon display of the prompt
<C>hange, set <T>ime, <S>ave or continue <B>ooting?
enter ‘T‘ to set the time and date. Pressing <T>ime will then allow you to set the
battery-buffered real-time clock on the AC 800F CPU board.
The date is entered in the order day, month, year.
Enter Date <dd.mm.yy>: 20.06.01
The time is entered in the order hours, minutes, seconds.
Enter local Time (hh:mm:ss):00:17:00
In case of an invalid entry the Boot Loader repeats this configuration item. A valid
entry starts the battery-buffered real-time clock.
RTC-Time: 20.06.00, 00:17:02 local
Date and time must be set correctly when using the AC 800F for
the first time!