ABB AC 800F

1 AC 800F System Overview
1-8
Figure 1-5 shows an AC 800F network based on the Fieldbus Foundation H1 which
will be available with Version 6.2 and higher.
Fig. 1-5 Fieldbus Foundation H1 (FFH1) network, example
In the example shown above the Fieldbus Foundation H1 bus is connected to the
Ethernet bus of the AC 800F via an external link device FIO 100.
Control Builder F can be used for configuring the bus and all devices connected to it.
No external configuration tool or external configuration programs are required.
For details on technical data and system architecture refer to:
• Freelance 2000 mounting and installation instructions, Rack based system
• Automation system Freelance 2000, catalog
• Automation system Freelance 2000, system description