ABB RELION Series - Function Block; Functionality; QTY_BAD Function Block; QTY_GOOSE_COMM Function Block

3.15.2 QTY_BAD function block
3.15.2.1 Function block
GUID-8C120145-91B6-4295-98FB-AE78430EB532 V1 EN
Figure 57: Function block
3.15.2.2 Functionality
The QTY_BAD function block evaluates the quality bits of the input signal and passes
it as a Boolean signal for the application.
The IN input can be connected to any logic application signal (logic function output,
binary input, application function output or received GOOSE signal). Due to
application logic quality bit propagation, each (simple and even combined) signal has
quality which can be evaluated.
The OUT output indicates quality bad of the input signal. Input signals that have any
other than test bit set, will indicate quality bad status.
3.15.2.3 Signals
Table 62: QTY_BAD Input signals
Name
Type Default Description
IN Any 0 Input signal
Table 63: QTY_BAD Output signals
Name
Type Description
OUT BOOLEAN Output signal
3.15.3 QTY_GOOSE_COMM function block
3.15.3.1 Function block
GUID-0FDC082E-C9A8-4B02-9878-6C49E44B7C0E V1 EN
Figure 58: Function block
1MRS758755 A Section 3
Basic functions
REC615 and RER615 113
Technical Manual