ABB RELION Series - Minimum Pulse Timer; Minimum Pulse Timer TPGAPC

Signals
Table 121: RS Input signals
Name
Type Default Description
S BOOLEAN 0=False Set Q output when set
R BOOLEAN 0=False Resets Q output when
set
Table 122: RS Output signals
Name Type Description
Q BOOLEAN Q status
NOTQ BOOLEAN NOTQ status
Technical revision history
Table 123: RS Technical revision history
Technical revision Change
L The name of the function has been changed from
SR to RS.
3.16.2 Minimum pulse timer
3.16.2.1 Minimum pulse timer TPGAPC
Function block
GUID-809F4B4A-E684-43AC-9C34-574A93FE0EBC V1 EN
Figure 78: Function block
Functionality
The Minimum pulse timer function TPGAPC contains two independent timers. The
function has a settable pulse length (in milliseconds). The timers are used for setting
the minimum pulse length for example, the signal outputs. Once the input is activated,
the output is set for a specific duration using the Pulse time setting. Both timers use the
same setting parameter.
1MRS758755 A Section 3
Basic functions
REC615 and RER615 133
Technical Manual