3.16.7.2 Functionality
The set-reset (8 pcs) function SRGAPC is a simple SR flip-flop with a memory that
can be set or that can reset an output from the S# or R# inputs, respectively. The
function contains eight independent set-reset flip-flop latches where the SET input has
the higher priority over the RESET input. The status of each Q# output is retained in
the nonvolatile memory. The individual reset for each Q# output is available on the
LHMI or through tool via communication.
Table 151: Truth table for SRGAPC
S# R# Q#
0 0
0
1)
0 1 0
1 0 1
1 1 1
1) Keep state/no change
3.16.7.3 Signals
Table 152: SRGAPC Input signals
Name
Type Default Description
S1 BOOLEAN 0=False Set Q1 output when set
R1 BOOLEAN 0=False Resets Q1 output when set
S2 BOOLEAN 0=False Set Q2 output when set
R2 BOOLEAN 0=False Resets Q2 output when set
S3 BOOLEAN 0=False Set Q3 output when set
R3 BOOLEAN 0=False Resets Q3 output when set
S4 BOOLEAN 0=False Set Q4 output when set
R4 BOOLEAN 0=False Resets Q4 output when set
S5 BOOLEAN 0=False Set Q5 output when set
R5 BOOLEAN 0=False Resets Q5 output when set
S6 BOOLEAN 0=False Set Q6 output when set
R6 BOOLEAN 0=False Resets Q6 output when set
S7 BOOLEAN 0=False Set Q7 output when set
R7 BOOLEAN 0=False Resets Q7 output when set
S8 BOOLEAN 0=False Set Q8 output when set
R8 BOOLEAN 0=False Resets Q8 output when set
1MRS758755 A Section 3
Basic functions
REC615 and RER615 147
Technical Manual
To Next Page
Loading...
