ABB RELION Series - Minimum Pulse Timer TPMGAPC

Technical revision history
Table 131: TPSGAPC Technical revision history
Technical revision
Change
B Outputs now visible in menu
C Internal improvement
3.16.2.3 Minimum pulse timer TPMGAPC
Function block
GUID-AB26B298-F7FA-428F-B498-6605DB5B0661 V1 EN
Figure 82: Function block
Functionality
The Minimum minute pulse timer function TPMGAPC contains two independent
timers. The function has a settable pulse length (in minutes). The timers are used for
setting the minimum pulse length for example, the signal outputs. Once the input is
activated, the output is set for a specific duration using the Pulse time setting. Both
timers use the same setting parameter.
GUID-8196EE39-3529-46DC-A161-B1C40224559F V1 EN
Figure 83: A = Trip pulse is shorter than Pulse time setting, B = Trip pulse is
longer than Pulse time setting
Signals
Table 132: TPMGAPC Input signals
Name
Type Default Description
IN1 BOOLEAN 0=False Input 1
IN2 BOOLEAN 0=False Input 2
Section 3 1MRS758755 A
Basic functions
136 REC615 and RER615
Technical Manual