ABB RELION Series - Monitored Data

Table 309: EFIPTOC Non group settings (Advanced)
Parameter Values (Range) Unit Step Default Description
Reset delay time 0...60000 ms 1 20 Reset delay time
Io signal Sel 1=Measured Io
2=Calculated Io
1=Measured Io Selection for used Io signal
4.2.1.10 Monitored data
Table 310: FEFLPTOC Monitored data
Name Type Values (Range) Unit Description
START_DUR FLOAT32 0.00...100.00 % Ratio of start time /
operate time
FEFLPTOC Enum 1=on
2=blocked
3=test
4=test/blocked
5=off
Status
Table 311: EFLPTOC Monitored data
Name
Type Values (Range) Unit Description
START_DUR FLOAT32 0.00...100.00 % Ratio of start time /
operate time
EFLPTOC Enum 1=on
2=blocked
3=test
4=test/blocked
5=off
Status
Table 312: EFHPTOC Monitored data
Name
Type Values (Range) Unit Description
START_DUR FLOAT32 0.00...100.00 % Ratio of start time /
operate time
EFHPTOC Enum 1=on
2=blocked
3=test
4=test/blocked
5=off
Status
Table 313: EFIPTOC Monitored data
Name
Type Values (Range) Unit Description
START_DUR FLOAT32 0.00...100.00 % Ratio of start time /
operate time
EFIPTOC Enum 1=on
2=blocked
3=test
4=test/blocked
5=off
Status
Section 4 1MRS758755 A
Protection functions
276 REC615 and RER615
Technical Manual