Customer support
Page 116 Acterna ANT-5
• The options currently installed can be displayed by pressing Menu and selecting
Options from the Tools menu. This function can also be used to install and
uninstall software options, which is generally carried out at an Acterna Sales
Office, or Technical Assistance Centre.
If required, the About screens can be saved in a file or sent to a printer on the serial
port by pressing Alt+#. See Section 2.7, Printing the current screen.
8.5 Software loading
The ANT-5 is designed to provide an easy path for future upgrades and
enhancements, not only in the form of software applications, but also by replacing the
core software for the ANT-5 itself.
Software will usually be supplied on a CD ROM, although other formats may also be
employed in the future. To load any software into the ANT-5, refer to the instructions
supplied with the software media.
8.5.1 Deleting software applications
WARNING: Do not do this unless you intend to delete an application.
Software applications can be deleted by highlighting the appropriate icon in the
application launcher screen and pressing Alt+Del (press Del whilst holding the Alt key
down). Next time the ANT-5 is switched on it will run a purging routine to reclaim the
memory which has been made available.
To Next Page
Loading...
