Optional software for the ANT-5
Acterna ANT-5 Page 87
5. Optional software for the ANT-5
Options that can be currently purchased include:
Option BN Number
PDH Mux/DeMux 4565/00.58
Concatenated Mapping 4565/00.59
Remote Operation 4565/00.60
Remote Control 4565/00.61
SONET 4565/00.62
AU3 & VT* Mappings
(*requires SONET option)
4565/00.53
ATM (see section 6)
4565/95.54
Note: Options purchased with a factory built ANT-5 will already be installed.
5.1 Installing options
New options purchased for the ANT-5 will be supplied with an access code. Options
are enabled as follows: -
From within the application an access Key
is used to install the option into the unit by
pressing Menu and selecting Options from
the Tools menu.
If an invalid key has been entered three
times, refer to the nearest technical
assistance centre for advice. (This does not
prohibit the unit from being used for other
purposes).
Note: If an invalid key has been entered incorrectly three times, refer to the nearest
technical assistance centre for advice. (This will not prohibit the unit being used for
other purposes).
To Next Page
Loading...
