EasyManua.ls Logo

Acterna ANT-5 - G.957 Optical Transmitter and Receiver; Optical Output and Input Levels

Acterna ANT-5
174 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix A – Specifications and ordering information
Acterna ANT-5 Page 119
9.4.3 Protected Monitor Point
PMP ...............................................-20dB to –26dB linear attenuation to ITU-T G.772**
**ANT-5 is fully compliant with ITU-T G772, sections 2.2 and 3.2 (PMP incorporated in
transmission equipment).
Compliance with sec 2.3 and 3.3 (PMP between transmission equipment) is achieved
subject to the following conditions:
Bit errors may be encountered when f and jitter are both at their maximum permitted
values. In addition the following precautions should be taken:
The ANT-5 should be allowed to stabilise to an ambient temperature for a period of 5
minutes before any measurements are taken.
For E3, root-f between 0 attenuation 6dB (max) is permitted.
Performance at E1, E3 and DS3 extends to –26dB (linear attenuation) for full
compatibility with older types of transmission equipment.
9.4.4 G.957 Optical Transmitter and Receiver
The following only applies if optical interfaces are fitted:
Connector.............................................................................................................FC/PC
Line code................................................................................................scrambled NRZ
Transmitter wavelengths .........................................................1310 nm and/or 1550 nm
(Depending on option fitted)
Line bit rates............................................. 155.52 Mbit/s 622.080 Mbit/s 2488.32 Mbit/s
(Depending on option fitted)
Receiver wavelength range..............................................................1100nm to 1580nm
9.4.5 Optical Output and Input levels
Option Output levels Input sensitivity
BN4565/00.01 STM-1 1310nm -8 to -15dBm -28dBm
BN4565/00.02 STM-1 1550nm -8 to -15dBm -28dBm
BN4565/00.03 STM-1 1310 + 1550nm -8 to -15dBm -28dBm
BN4565/00.14 STM-1/4 1310 + 1550nm -8 to -15dBm -28dBm
BN4565/00.64 STM-1/4 1310nm LR 0 to -5dBm -28dBm
BN4565/91.16 STM-1/4/16 1310 + 1550nm +3 to -2dBm -34dBm @ 155Mps
-28dBm @ 622Mps
-28dBm @ 2488Mps

Table of Contents

Related product manuals