adept technology MV Instruction Handbook

Chapter 5 - Maintenance
108 AdeptModules Instruction Handbook, Volume 1: Adept MV Controller Interface, Rev. A
WARNING: Dangerous voltages are present inside the power chassis.
Turn off the power to the power chassis and protect it against an
unauthorized return to service, before opening the front grille to inspect
the air filter. Failure to observe this warning could cause injury or damage
to your equipment.
1. Turn off the power to the power chassis and protect it against an unauthorized
return to service.
2. Open the front grille by loosening two screws and swinging the grille out.
3. Pull the air filter out and inspect for dust or dirt particles. If cleaning is required,
use compressed air to clean the filter.
4. Replace the cleaned air filter and secure the grille.
5.5 Check Lamps on VFP
Use the Lamp Test button on the external Front Panel to test the lamps once per month.
Replace any lamps that are not working. Contact Adept Customer Service for replacement
information.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

adept technology MV Specifications

General

Brand	adept technology
Model	MV
Category	Controller
Language	English