adept technology MV Instruction Handbook

Chapter 2 - Installation
32 AdeptModules Instruction Handbook, Volume 1: Adept MV Controller Interface, Rev. A
2.3 Environmental and Facility Requirements for Power Chassis
The Adept PA-4 power chassis is typically installed in the same enclosure as the controller.
See Table 2-1 for environmental requirements. See Table 2-8 on page 58 for electrical
requirements.
2.4 Before Unpacking the Adept Equipment
Carefully inspect all shipping crates for evidence of damage during transit. If any damage
is indicated, request that the carrier’s agent be present at the time the container is
unpacked.
2.5 Transport and Storage
For the transport and storage of the crates and boxes use an adequate tool, such as, a pallet
jack or a forklift.
WARNING: Some crates and boxes are heavier than others!
Do not attempt to transport all AdeptModule boxes by hand. The use of a
pallet jack or forklift, etc., may be required.
WARNING: The center of gravity of the AdeptModules shipping crates is
not in the middle of the boxes. Pay attention when you transport the
crates.
2.6 Unpacking and Inspecting the Adept Equipment
Compare the actual items received (not just the packing slip) with your equipment
purchase order and verify that all items are present and that the shipment is correct.
Inspect each item for external damage as it is removed from its container. If any damage is
evident, contact Adept at the numbers listed in section 1.15.
Retain all containers and packaging materials. These items may be needed to relocate the
equipment. Should the shipment be incorrect or damaged on arrival, the sales order
number and purchase order numbers will be important.
!
!
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

adept technology MV Specifications

General

Brand	adept technology
Model	MV
Category	Controller
Language	English