Repackaging for Relocation
AdeptModules Instruction Handbook, Volume 1: Adept MV Controller Interface, Rev. A 33
2.7 Repackaging for Relocation
If the AdeptModules or other equipment needs to be relocated, reverse the steps in the
installation procedures in this section. Reuse all original packing containers and materials
and follow all safety notes used for installation. Improper packaging for shipment will
void your warranty.
2.8 AdeptModules Installation
AdeptModules must always be installed on a base. A base could be a mounting plate or
table. AdeptModules must not be installed directly to the floor. AdeptModules can be
mounted vertically on the wall or inverted from a gantry or the ceiling. For mounting
specifications refer to AdeptModules Instruction Handbook, Volume 2: Mechanical Assembly.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com