adept technology MV Instruction Handbook

Chapter 1 - Safety
18 AdeptModules Instructrion Handbook, Volume 1: Adept MV Controller Interface, Rev. A
How to Use this Manual
This manual is intended for use with Volume 2 of the AdeptModules Manual, Mechanical
assembly. This manual contains information that is useful during installation,
commissioning, and operation of the system, as well as during the mechanical assembly
and periodical maintenance of the AdeptModule.
Figure 1-3. AdeptModules Joint Motions
Definition of Manipulating Industrial Robot
An automatically controlled, reprogrammable, multipurpose, manipulative machine with
several degrees of freedom (see Figure 1-3), which may be either fixed in a place or mobile,
for use in industrial automation applications is called a manipulating robot. (ISO
10218:1992(E))
1.2 Notes, Cautions, and Warnings
There are four levels of special notation used in this instruction handbook. In descending
order of importance, they are:
Warning: If the actions indicated in a “WARNING” are not complied
with, injury or major equipment damage could result. A Warning
statement will typically describe the potential hazard, its possible effect,
and the measures that must be taken to reduce the hazard.
Warning: If in a “WARNING” the actions are indicated with an lightning
bolt instead of an exclamation mark, an electrical danger or shock is
possible for personnel working with the system.
!
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

adept technology MV Specifications

General

Brand	adept technology
Model	MV
Category	Controller
Language	English