Aeroflex 3901 - Page 116

AutoTest Sytem Operation
Subject to Export Control, see Cover Page for details.
5-20
Set Commands (cont)
set_amfmmod_mod1_devper [ kHz or % ]
Sets level/amplitude for Modulator 2.
FM:
Level/Amplitude is displayed in kHz
Range: 0.001 to 150 kHz
AM:
Level/Amplitude is displayed as percent
Range: 0.1 to 100%
AM USB:
Level/Amplitude is displayed as percent
Range: 0.1 to 100%
AM LSB:
Level/Amplitude is displayed as percent
Range: 0.1 to 100%
Format: Decimal values
set_amfmmod_mod1_type [ 0 = Sine ]
Sets waveform shape for Modulator 2.
Default is 0 = Sine.
set_amfmmod_mod1_enable [ 0/1 ]
Turns modulation source for Modulator 2 ON/OFF.
Valid values are:
0 = OFF
1 = ON
set_amfmmod_mod2_freq [ freq in kHz ]
Sets Modulator 3 frequency.
Format: Decimal frequency value in kHz
Range: 0.001 to 20 kHz
set_amfmmod_mod2_devper [ kHz or % ]
Sets level/amplitude for Modulator 3.
FM:
Level/Amplitude is displayed in kHz
Range: 0.001 to 150 kHz
AM:
Level/Amplitude is displayed as percent
Range: 0.1 to 100%
AM USB:
Level/Amplitude is displayed as percent
Range: 0.1 to 100%
AM LSB:
Level/Amplitude is displayed as percent
Range: 0.1 to 100%
Format: Decimal values