NTP 160 — Install an I-211M-K or I-211M-L indoor ONT
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 NTP 160-7
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
5 Wall-mount the outdoor enclosure for the I-211-M-L indoor ONT.
a If you are using a Fiber Slack Storage Tray (3EM 20293 AA):
i Secure the FSST (3EM 20293 AA) to the mounting area. Use the
appropriate hardware as defined by local installation practices. Use the
cable storage compartment mounting holes; see Figure NTP 160-4.
Figure NTP 160-4: Mounting the cable storage compartment (3EM 20293 AA)
ii Remove either the aerial or buried cable entry grommet; see
Figure NTP 160-5.
Bracket mounting point Bracket mounting point
Cable storage compartment
mounting hole slot
Bracket
mounting point
Cable storage
compartment
mounting hole
Cable storage
compartment
mounting hole
Bracket
mounting point
19090
To Next Page
Loading...
