Alcatel-Lucent 7360 - Procedure 6-39 to Clear the SLID; Procedure 6-40 to Enter the SLID

6 — ONT management using an ONT interface
6-58 November 2013 Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
Procedure 6-39 To clear the SLID
1 Ensure that the ONT is disconnected from the PON optical cable.
2 From the SLID window, click on the Clear button to reset the SLID to its default
settings.
The SLID clear dialog box opens, as shown in Figure 6-34.
Figure 6-34 SLID clear dialog box
3 Click on YES to reset the SLID. The SLID window is refreshed with the default SLID
settings for the ONT.
4 STOP. This procedure is complete.
Procedure 6-40 To enter the SLID
1 Ensure that the ONT is disconnected from the PON optical cable.
2 From the SLID window, ensure that the SLID value is null or DEFAULT, as shown
in Figure 6-35.
Figure 6-35 SLID window
Note — After a SLID is reset, the SLID value is DEFAULT.