Alcatel-Lucent 7360 - NTP 131-1: I-010 G-U Indoor ONT; NTP 131-2: I-010 G-U Indoor ONT 3 FE 55284 AA Variant

NTP 131 — Replace an I-010G-U indoor ONT
NTP 131-2 November 2013 Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
Figure NTP 131-1: I-010G-U indoor ONT
Figure NTP 131-2: I-010G-U indoor ONT 3FE 55284 AA variant
3 Disconnect the SC/APC fiber optic cable from the I-010G-U indoor ONT (DLP 133).
4 Replace the I-010G-U indoor ONT with a new unit.
5 Reattach the power cable to the ONT.
6 Reattach the Ethernet cable to the ONT (DLP 101).
7 Verify that the unit is powered. If there is no power, press the Power button.
P
O
W
ER
ALA
RM
CONNECTION
ETH
PWR
ON/OFF
RESET
GE
SC/APC
connection
Ethernet
connection
Reset
button
Power
button
Power
connection
23529
23696
LAN
POWER
ON/OFF
POWE
R
OPTICAL
ALARM
LAN
LED
Switch
Reset
button
LED
Switch
Reset
SC/APC connection
Ethernet
connection
Power
connection
Power
button
Danger — Fiber optic cables transmit invisible laser light. To avoid eye
damage or blindness, never look directly into fibers, connectors, or
adapters.