Alcatel-Lucent 7360 - B-2404-P Standards Compliance; Network Synchronization for CES; B-2404-P Business ONT Functional Blocks

10 — B-2404-P unit data sheet
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 10-9
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
The B-2404-P also supports connections for E1 services. The CES IWF interface
provides MEF-8 packetization of E1 traffic from the E1/T1 interface, which provides
four RJ-48C ports. Figure 10-3 shows the B-2404-P business ONT functional block
diagram.
Figure 10-3 B-2404-P business ONT functional blocks
Network synchronization for CES
The B-2404-P business ONT Circuit Emulation System (CES) IWF supports the
following network synchronization modes the operation:
• Loop timing (TX TDM clock generated from T1/E1 recovered clock)
• Network timing (TX TDM clock generated from ONT Network Timing
Reference recovered from PON interface)
• Differential Recovery clock [TX TDM clock based on common reference clock
and data contained in CESoETH frames (for example, RTP header info)]
• Adaptive timing (TX TDM clock is based on the arrival time of the frames and
buffer fill rate)
10.10 B-2404-P standards compliance
The B-2404-P business ONT is compliant with the following standards:
• 802.1d support for bridging
• 802.1p support for mapper service profile on U/S
• 802.1p support for marking and remarking
• 802.1p support for Class of Service based on UNI, VLAN-ID, ToS/DSCP
• 802.1q support for virtual switch based on VLAN
• G.703 and G.704 conformance
• G.711 for FAX, modem connection and TTY
• G.984 compliant support for GPON standards including compliant framing
• G.984.2 support for Amd1, Class B+
• G.983.2 and G984.4 (standard and revised) support for OMCI interface for ONT
management and provisioning
Power
Converter
GPON
Ethernet (4)
RJ-45
POTS (2)
RJ-11
RJ-48C
Diplexer
22564
SOC
E1/ET (4)
CES
IWF