17 — I-010G-Q and I-010G-S unit data sheet
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 17-5
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
Figures 17-1 and 17-2 show the physical connections for I-010G-Q and I-010G-S
indoor ONTs.
Figure 17-1 I-010G-Q and I-010G-S indoor ONT connections (front view)
Figure 17-2 I-010G-Q and I-010G-S indoor ONT connections (back view)
Table 17-4 describes the physical connections on I-010G-Q and I-010G-S indoor
ONTs.
Table 17-4 I-010G-Q and I-010G-S indoor ONT physical connections
Note
(1)
The primary path for the earth ground for these ONTs is provided by the 12V Return signal in the
power connector.
Connection
(1)
Description
Ethernet port This connection is provided through an Ethernet RJ-45 port. One
Ethernet connection is supported. The Ethernet port can support
voice, video, data, and high-speed Internet access.
Fiber optic port This connection is provided through an SFF type laser fiber optic
cable with SC/APC connector and port with SC/APC adapter.
Power This connection is provided through a power cable with a barrel
connector to the power connector.
21149
EQPT
PON
MG
NT
LAN
ALM
Ethernet
(ETH) RJ-45
21148
EQPT
PON
MGNT
LAN
ALM
Power
connector
Power
switch
SC/APC
Fiber optic
connector