Alcatel-Lucent 7360 - NTP 109 - Install a B-8102-A or B-8112-A ONT; Recommended Tools

Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 NTP 109-1
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
NTP 109 — Install a B-8102-A or
B-8112-A ONT
Purpose
This NTP provides the steps to install a B-8102-A or B-8112-A business ONT.
General
The DLPs listed in this NTP describe the steps to install a B-8102-A or B-8112-A business
ONT.
Prerequisites
See the listed DLPs for prerequisites.
Recommended tools
You need the following tools for the installation:
• #2 Phillips screwdriver
• 1/4 in. (6 mm) flat blade screwdriver
• 1/8 in. (3 mm) flat blade screwdriver
• TELCO 216 tool for securing pin-in-hex bolts
• security wrench for pinned 5/32 in. (4 mm) Allen-type tamper-resistant screws
• insulated side cutters
• electrician’s knife
• wire stripper
• fiber optic splicing tools
• RJ-45 cable plug crimp tool
• voltmeter or multimeter
• optical power meter
• drill and drill bits