EasyManua.ls Logo

Alcatel-Lucent 7360 - I-010 S-P and O-010 S-P Standards Compliance; Single-Residence Gigabit Ethernet ONT SFP; R04.06.70 P-Bit Value Translation; Special Considerations

Alcatel-Lucent 7360
1073 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19 — I-010S-P and O-010S-P unit data sheet
19-10 November 2013 Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
Figure 19-4 Single-residence Gigabit Ethernet ONT SFP
19.11 I-010S-P and O-010S-P standards compliance
The I-010S-P and O-010S-P meet the following standards:
SFP MSA SFF-8432-compliant digital diagnostics
GR-468-CORE
G.984.5
G.988-compliant OMCI support
RoHS
TR-156
19.12 Special considerations
The I-010S-P and O-010S-P SFP ONTs have the following restrictions:
Auto-negotiation on the GigE Link is not supported. It is set as 1G link.
Dying gasp is not supported.
ONT upgrade will be slower than normal and could take up to 8 minutes.
EMAC traffic loopback not supported.
R04.06.70 p-bit value translation
ONTs running R04.06.70 software will change their behavior; they will not translate
the p-bit values in the downstream direction. In that sense, the ONTs running
R04.06.70 software interpret the request from the OLT in a way that is different from
the OMCI standard. This only applies for R04.06.70.
GPON
MAC
Network
Processor
Memory
LDD
CDR/
SERDES
LDD
BOSAGPON
ODN
Controller
Microcontroller
Ethernet
MAC
SGMII/
RGMII
i
2
c
23150

Table of Contents

Related product manuals