6 — ONT management using an ONT interface
6-44 November 2013 Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
From the HTTP interface, you can collect trace statements in a log file that you can
view on-line as follows:
1 Specify the traffic to log, and enable tracing.
2 Specify the action for the system to take when the trace log is full.
3 Disable tracing.
4 Specify the trace log to view.
From the CLI interface, you can view trace statements in real time, or collect trace
statements in a log file that you can copy to a TFTP server. To view trace statements
in real time from the CLI interface:
1 Specify the traffic that you want to view in real time.
2 Enable real-time tracing.
3 Press ↵ when you are finished.
To trace in logging mode from the CLI interface:
1 Specify the traffic that you want to log.
2 Enable tracing.
3 Specify the action to take by the system when the trace log is full.
4 Disable tracing.
5 Copy the trace log to a TFTP server.
This section shows you how to:
• enable tracing
• disable tracing
• retrieve the trace log
Prerequisites
The prerequisites are:
• The user access level of the ONT is read-write.
• The ONT is connected to the GPON.
• The ONT is activated with its services.
• The steps to access the interface are completed.
• See Procedure 6-1 for HTTP interface using the first Ethernet port.
• See Procedure 6-4 for CLI interface using the first Ethernet port.
• See Procedure 6-6 for HTTP interface for Package C ONTs
Note — As tracing affects the performance of an ONT, ensure that
you disable tracing when you are finished.
To Next Page
Loading...
