Alcatel-Lucent 7360 - VEIP and the Relationship to TR-069; Restrictions to Configure an ONT VEIP Port

5 — VoIP overview
5-16 November 2013 Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
The VEIP is the boundary point between the OMCI domain and the TR-069 domain.
Beyond the VEIP, voice services or other functionality is managed by the CWMP
per the TR-069 standard. The L3 functions of devices that support L3 can be
managed via home management systems (ACS or HDM) defined by TR-069 or by
web-based GUIs.
This VEIP managed entity represents the handoff point in an ONT or MDU to a
separate, non-OMCI management domain. One or more Ethernet traffic flows are
present at this boundary.
Figure 5-5 shows the relationship between the OMCI and non-OMCI domains.
Figure 5-5 VEIP and the relationship to TR-069
The ONT must support TR-069 configuration via a third-party manager.
Table 5-4 identifies the restrictions that apply.
Table 5-4 Restrictions to configure an ONT VEIP port
Task Restriction
Create an ONT VEIP port The ONT card must be created
The QoS session profile must be created.
The DSCP to p-bit mapping profile must exist, if a non-default
profile is specified.
Up to 16 VEIPs can be configured on an ONTCARD.
(1 of 2)
Telco
OLT ACS
Access
Seeker
ONT SIP client
Enable data connection
Physical POTS maintenance
Via OMCI
VoIP parameters provisioning
Through TR - 069
22217
VEIP
SIP UA
client
IP client
Media
client