Alcatel-Lucent 7360 - ONT Reset; ONT and MDU Interface Connection Limitations; ONT and MDU Connection Capacity

1 — ONT and MDU overview
1-32 November 2013 Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
1.11 ONT reset
The ONT can be rebooted or reset using the HTTP, the CLI interface or the reset
button on the ONT. A reboot/reset of the ONT can be used to recover from
connection, power, software download, and other failure situations. The reboot
process will interrupt service for a short period of time, approximately one minute.
The reboot sequence consists of:
• hardware self check
• file system initialization
• PLOAM activation
• ranging of the ONT
• provisioning download from OLT
• activate POTS service
• activate VoIP service
1.12 ONT and MDU interface connection limitations
Table 1-14 shows the maximum connection capacity for ONTs and MDUs.
Table 1-14 ONT and MDU connection capacity
ONT type and
model
Maximum capacity
POTS 10/
100/
BASE-T
10/
100/
1000
BASE-T
RF
video
(CATV)
MoCA VDSL/
VDSL2
DS1/1 Local
craft
GPON
SC/
APC
Business ONT
B-0404-A — — 4 — — — 4 — 1
B-0404G-B — — 4 — — — 4 — 1
B-2404-P 2 — 4 — — — 4 — 1
B-8102-A 8 — 1 — — — 2 — 1
B-8112-A 8 — 1 1 — — 2 — 1
GPON ONTs
G-010V-P ———— —1 —1 1
G-241W-P 2 —4 1 ————1
Indoor ONTs
I-010G-A ——1 — ————1
I-010G-B ——1 — ————1
I-010G-P ——1 — ————1
I-010G-Q ——1 — ————1
I-010G-S ——1 — ————1
(1 of 4)