Alcatel-Lucent 7360 - NTP 161 - Replace an I-211 M-K or I-211 M-L Indoor ONT

Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 NTP 161-1
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
NTP 161 — Replace an I-211M-K or
I-211M-L indoor ONT
Purpose
This NTP provides the steps to replace an I-211M-K or I-211M-L indoor ONT.
General
The steps listed in this NTP describe mounting and cabling for replacement I-211M-K or
I-211M-L indoor ONTs.
Prerequisites
See the listed DLPs for prerequisites.
Recommended tools
You need the following tools for replacing the ONT:
• screwdriver for wall mounting the ONT unit
• Phillips screwdriver for connecting the SC/APC cable
• fiber optic splicing tools
• RJ-45 cable plug crimp tool
• voltmeter or multimeter
• optical power meter
• wall mounting template
• drill and drill bits