Alcatel-Lucent 7360 - NTP 145-1: I-021-P Indoor ONT Connections; NTP 145-2: I-241-Q Indoor ONT Connections

NTP 145 — Install an I-021G-P or I-241G-Q indoor ONT
Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02 November 2013 NTP 145-3
3FE 55873 AAAA TCZZA Edition 01
ONT Product Information Guide
4 Review the connection locations as shown in Figure NTP 145-1 for I-021G-P indoor
ONTs and Figure NTP 145-2 for the I-241G-Q indoor ONT.
Figure NTP 145-1: I-021-P indoor ONT connections
Figure NTP 145-2: I-241-Q indoor ONT connections
5 Connect the Ethernet cables to the RJ-45 ports (DLP 101).
6 Connect the coaxial cable to the F-Type connector (DLP 116).
7 For the I-241G-Q indoor ONT, connect the POTS cables to the RJ-11 ports
(DLP 123).
8 Connect the SC/APC fiber optic cable (DLP 125).
Warning — Be careful to maintain a bend radius of no less than 1.5
inches (3.8 cm) when connecting the fiber optic cable. Too small of a
bend radius in the cable can result in damage to the optic fiber.
GE1
GE2
RESET
RF
PWR
PWR
TEST
GPON
VIDEO
LAN
Ethernet
ports
Reset
button
Power
connector
Fiber optic
connector
F-Type
coaxial
21589
GE1
GE2
RESET
RF
PWR
PWR
TEST
GPON
VIDEO
LAN
POTS
Ethernet
ports
Reset
button
Power
connector
Fiber optic
connector
F-Type
coaxial
POTS
ports
22657
GE1
GE2
POTS1
P
OTS2