Alcatel-Lucent 7360 - To Access the HTTP Interface Using the First Ethernet Port; To Disconnect from the HTTP Interface; Login Screen

6 — ONT management using an ONT interface
6-12 November 2013 Alcatel-Lucent 7302 ISAM | 7330 ISAM FTTN | 7360 ISAM FX ONT R04.06.02
Edition 01 3FE 55873 AAAA TCZZA
ONT Product Information Guide
The following procedures provide the steps to access and to disconnect from the
HTTP interface using the first Ethernet port.
Procedure 6-1 To access the HTTP interface using the first Ethernet
port
1 Connect a computer or laptop with an HTTP client to the first Ethernet port on the
ONT using an Ethernet cable.
2 Open a Web browser and enter the IP address of the ONT in the Address bar:
http://192.168.4.254↵
The login screen appears, as shown in Figure 6-5.
Figure 6-5 Login screen
3 Type a User name and Password in the login screen, and click on OK.
The Web-Management System window opens; see Figure 6-1.
4 STOP. This procedure is complete.
Procedure 6-2 To disconnect from the HTTP interface
1 Close any open window.
2 Disconnect the computer or laptop from the first Ethernet port.
3 STOP. This procedure is complete.
Note — The HTTP interface requires a specific username and
password. Contact your Alcatel-Lucent technical support representative
for username and password information.